Desktop Barebones - Super Savings! Save up to 40%
Super Savings! Up to 40% off on Desktop Barebones at Tecnopedia. Top brands include HiLetgo, Geekworm, Smraza, kuman, DFROBOT, Shuttle, Supermicro, Adafruit, Pimoroni, Marvelmind Robotics, Mega1Comp, EVGA, Vilros, HP, waveshare, iStarUSA Group, & AXSOC. Hurry! Limited time offers. Offers valid only while supplies last.
HiLetgo 5pcs Micro SD TF Card Adater Reader Module 6Pin SPI Interface Driver Module with chip Level Conversion for Arduino UNO R3 MEGA 2560 Due
By HiLetgo
In Stock
$6.99
mpn: 3-01-0038-5PCS,
4.5 out of 5 stars with 25 reviews
Description: The module (MicroSD Card Adapter) is a Micro SD card reader module for reading and writing through the file system and the SPI interface driver, SCM system can be completed within a file MicroSD card Support Micro SD Card, Micro SDHC card (high speed card) Level conversion circuit board that can interface level is 5V or 3.3V Power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board Communications interface is a standard SPI interface 4 M2 screws positioning holes for
Raspberry Pi 3 B+ Aluminum Armor Case with Housing Heat Dissipation, Metal Case/Enclosure with Heatsink Pillar for Raspberry Pi 3 Model B Plus / 3B
$22.99
By Geekworm
In Stock
$18.69
You Save: 19%
mpn: TB-2018-29,
4.8 out of 5 stars with 58 reviews
[Note] Raspberry Pi board is not included. There are 4pcs Thermal Tape in the packing. And two big Thermal Tape are optional, when you use the case for Raspberry pi 3B+, you just need one Thermal Tape; when you use the case for 3B, you need two Thermal Tapes. [Packing List] 1 x Armor Aluminum alloy Case (A or B is optional) 1 x Assembly pack 4 x Thermal Tape 1 x Screwdriver [Overview] Big heatsink Design, it can keep your Pi keep cooling when you overclocking it. After we test, it can drop
Smraza Raspberry Pi 3 B+ Case with Fan, RPI Heatsinks, 5V 2.5A Power Supply for Raspberry Pi 3 Model B+(B Plus), Compatible with Raspberry Pi 3 Model B, Pi 2 Model B (4 Layers Case)
By Smraza
In Stock
$16.99
mpn: SW33sF,
4.8 out of 5 stars with 38 reviews
4 layer Raspberry Pi 3 B+ Case, compatible with the raspberry pi 2, 3 model b, 3B+(B plus). It can keep your pi safe with good feeling. Note: 1.Please Peel Off the Protective Films of acrylic Layer before you assemble it. 2. The case does not compatible with Asus Tinker Board and Libre Computer Board. And it does not include raspberry pi. Package Included: 1)4 layer Case x1 2)Mini Cooling Fan x1 3)Power Supply x1 4)Aluminum Heat Sinks x3 5)Phillips Screwdriver x1 6)Instruction manual x 1
Kuman 7 inch Raspberry Pi Touch Screen Case Holder
$19.99
By kuman
In Stock
$11.99
You Save: 40%
mpn: SC7B-1-F, ean: 6932083848184,
4.2 out of 5 stars with 36 reviews
Kuman Raspberry Pi 7 inch TFT touch screen acrylic case set, making your experiment more conveniently. specification: Color:Black Size: 10.2 * 16.5 * 1.4 cm (inside) 12.5 * 18.1 * 1.4 cm (outside) Material: Acrylic Package contents: 1 * Raspberry Pie 7 inch TFT acrylic case or TFT touch screen Note: * This is just a case holder. Screen, raspberry pi and cable are not included. * If you need instruction, please contact us or refer the QA, we are always here for you. * Please see the
DFRobot DFR0282 Beetle Arduino-Compatible Microcontroller
$11.95
By DFROBOT
In Stock
$10.44
You Save: 13%
mpn: DFR0282, ean: 0720405524078,
4.8 out of 5 stars with 55 reviews
The new generation'' beetle'' controller derives its core notion from minimalism without compromising functionality. It comes with atmel atmega32u4 @16MHz clock time and has expanded amounts of interfaces: 10 digital pins, 5 analog pins and 4 PWM pins. To further make it user-friendly, it is compatible with Micro USB so that direct programming and testing is no longer a headache. Select'' arduino leonardo (tools > board > arduino leonardo in arduino ide), the atmega32u4 comes pre-burned with a
Shuttle XPC Slim XC60J Intel Celeron J3355, 8 x COM Ports, Support SODIMM DDR3L (Max. 16GB), Include Heatpipe Cooling Module
By Shuttle
In Stock
$164.99
mpn: XC60J, ean: 0887993001104,
4.3 out of 5 stars with 51 reviews
Shuttle XC60J is a compact 3-Liter mini barebone that feature robust performance and can be customized to drive highly interactive kiosk, vending machine, and POS applications. Embedded with Intel Apollo Lake Celeron J3355 dual core processor. In addition to a full I/O interface, XC60J also comes with 8 COM ports to connect with peripheral devices.Equipped with Intel Apollolake Celeron J3355 (2.0 GHz) dual-core processor. Supports Dual Channel SO-DIMM DDR3L, max 16GB (max. 8GB per slot). Multipl
Supermicro System SYS-7047R-3RF4+ 4U 920W C606 8x3.5inch SAS/768GB Retail
By Supermicro
In Stock
$1,649.99
mpn: Supermicro-SYS-7047R-3RF4+, ean: 0807320179986,
4.8 out of 5 stars with 27 reviews
Supermicro System SYS-7047R-3RF4+ 4U 920W C606 8x3.5inch SAS/768GB RetailSupermicro System SYS-7047R-3RF4+ 4U 920W C606 8x3.5inch SAS/768GB Retail.
Shuttle XPC Slim DH370 Mini Barebone PC Intel H370 Support 65W Coffee Lake CPU No RAM No HDD/SSD No CPU No OS
By Shuttle
In Stock
$309.99
mpn: DH370, ean: 7432123425454,
4.6 out of 5 stars with 8 reviews
Engineered for the next level of digital signage and multi-displays, the DH370 combines higher processing performance with excellent scalability. Powered by 8th generation Intel processors and integrated with Intel UHD Graphics for advanced computing, the DH370 supports up to three 4K displays via independent HDMI 2.0a and 2 x DisplayPort outputs. It is also equipped with rich I/OS including 2 x Giga LAN, 4 x USB 3.1 Gen 2, 4 x USB 3.1 Gen 1, 2 x M.2 and 2 x Serial ports to connect to customer-d
Adafruit Feather M0 with RFM95 LoRa Radio - 900MHz
$40.96
By Adafruit
In Stock
$40.92
mpn: 3178, ean: 0602401813519,
4.1 out of 5 stars with 34 reviews
Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores.This is the Adafruit Feather M0 RFM95 LoRa Radio (900MHz) - our take on an microcontroller with a ''Long Range (LoRa)'' packet radio transceiver with built in USB and battery charging. Its an Adafruit Feather M0 with a 900MHz radio module cooked in! Great for making wireless networks that are more flexible than
Pimoroni Pan-Tilt HAT Full Kit w/Micro Servos
$39.76
By Pimoroni
In Stock
$34.99
You Save: 12%
mpn: PIM183, ean: 0704256793470,
4.6 out of 5 stars with 32 reviews
Ideal for a mini CCTV system, this set of horizontal and vertical motion servos will give you Pi camera movement with a minimum of fuss. Pan-Tilt HAT lets you mount and control one of our pan-tilt modules right on top of your Raspberry Pi. The HAT and its on-board microcontroller let you independently drive the two servos (pan and tilt), as well as driving up to 24 regular LED (with PWM control) or NeoPixel RGB (or RGBW) LEDs. There's also a handy slot through which you can route the servo, LED,
Marvelmind Precise (±2cm) Indoor GPS Starter Set 915 MHz + IMU
By Marvelmind Robotics
In Stock
$429.00
mpn: 4680038530180, ean: 4680038530180,
4.3 out of 5 stars with 33 reviews
MARVELMIND NAVIGATION SYSTEM OVERVIEW - Marvelmind Indoor Navigation System designed to provide precise (±2cm) location data to autonomous robots, vehicles (AGV), and copters - It is also used to track other objects that the mobile beacon installed on, for example, virtual reality (VR) systems, helmets for construction workers or miners, etc. MARVELMIND STARTER SET OVERVIEW Starter set includes 6 items: 4 stationary beacons, 1 mobile beacon with IMU and modem. Mobile and stationary beacons do
Mega1Comp -Raspberry Pi 3 Model B+ (B Plus), 16GB SD Card Noobs OS pre-Loaded, Aluminum Heat Sink Set - Basic Starter kit
By Mega1Comp
In Stock
$49.99
mpn: SM-PIB162, ean: 0688637578163,
4.6 out of 5 stars with 23 reviews
Raspberry Pi 3 Model B+ is new and improved for 2018 with faster CPU and GPU performance, advanced 5GHz WiFi-AC, Bluetooth LE capabilities, Power-Over-Ethernet Capable Gigabit Ethernet, and more! The SoC at the heart of the board has been re-designed to improve performance by over 30%. The metal heat spreader allows it to run at the top speed of 1.4GHz for longer than the previous model. What's Included: Raspberry Pi 3 Model B+ Mini Computer MicroSD Card with NOOBS software 2x Performance Heats
EVGA GeForce RTX 2080 Ti XC2 Ultra Gaming, 11G-P4-2387-KR, 11GB GDDR6, iCX2 & RGB LED
By EVGA
In Stock
$1,299.99
mpn: 11G-P4-2387-KR, ean: 0843368058128,
4.9 out of 5 stars with 7 reviews
The EVGA GeForce RTX 20-series graphics cards are powered by the all-new NVIDIA Turing architecture to give you incredible new levels of gaming realism, speed, power efficiency, and immersion. With the EVGA GeForce RTX 20-series gaming cards you get the best gaming experience with next generation graphics performance, ice cold cooling, and advanced overclocking features with the all new EVGA Precision x1 software. The new NVIDIA GeForce RTX GPUs have reinvented graphics and set a new bar for
Supermicro AS-2013S-C0R 2U AMD EPYC 7000-Series Server
$1,420.16
By Supermicro
In Stock
$1,249.99
You Save: 12%
mpn: AS2013SC0R, ean: 0672042324194,
4.4 out of 5 stars with 26 reviews
Key Features • Cloud and Virtualization needs • Connectivity/Storage Computer Nodes • Database Processing & Storage • High End Enterprise Server • Hosting & Application delivery 1. Single AMD EPYC™ 7000-Series Processor 2. Up to 1TB Registered ECC DDR4 2666MHz SDRAM in 8 DIMMs 3. Expansion slots: 3 PCI-E 3.0 x16 (low profile); 3 PCI-E 3.0 x8 (low profile) 4. IPMI 2.0 + KVM with dedicated LAN 5. 2x 1GbE LAN ports via Intel® I210 6. 8 hot-swap 3.5''
Vilros Raspberry Pi 3 Model B+ Complete Starter Kit with Camera Module
By Vilros
In Stock
$69.99
mpn: Pi 3 B+ With Cam, ean: 0700381990050,
4.4 out of 5 stars with 21 reviews
This is the Raspberry Pi 3 Model B+ [ Pi3+ ] Complete Kit with Camera Module from VilrosThis starter package is the perfect gift to help you or your child get into creating projects with the newest Raspberry Pi 3 model b+ [ Pi3b+ ] Board . This Kit can also be used in school or college setting for educational use. This Raspbery pi 3 b+ kit comes equipped with Great accessories to get you up and running in no time. This Rasberry Pi 3 b+ Kit is super easy to use, its as easy as baking a Rasbery
HP ProLiant DL20 G9 1U Rack Server - 1 x Intel Xeon E3-1230 v6 Quad-core (4 Core) 3.50 GHz DDR4 SDRAM - 1 TB HDD - 1 x 290 W
$929.00
By HP
In Stock
$869.00
You Save: 6%
mpn: P02058-S01, ean: 0190017264851,
4.9 out of 5 stars with 10 reviews
HPE DL20 G9 E3-1230v6 LFF 1TB NA SB SvrDrive new applications; Turbo charge performance; Secure foundation.
Vilros Raspberry Pi 3 Model B+ Complete Starter Kit with Keyboard and Mouse
By Vilros
In Stock
$84.99
mpn: VL0001, ean: 0700381990067,
4.6 out of 5 stars with 45 reviews
This is the Raspberry Pi 3 Model B+ [ Pi3+ ] Complete Kit with Camera Module from VilrosThis starter package is the perfect gift to help you or your child get into creating projects with the newest Raspberry Pi 3 model b+ [ Pi3b+ ] Board . This Kit can also be used in school or college setting for educational use. This Raspbery pi 3 b+ kit comes equipped with great accessories to get you up and running in no time. This Rasberry Pi 3 b+ Kit is super easy to use, its as easy as baking a Rasbery Pi
iStarUSA Group KIT- 2U Extended IPC Case (D-200L-T)
By iStarUSA Group
In Stock
$250.00
mpn: D-200L-T, ean: 0846813015554,
4.6 out of 5 stars with 31 reviews
iStarUSA Group KIT- istarUSA 2U Ext. IPC Case/Supports EATX Motherboard/Supports Slim Optical Drive/Removable Air Filter.Supports EATX Motherboard. Supports Slim Optical Drive. Removable Air Filter. Patented Aluminum Front Panel with Locks. 1.2mm SECC Zinc-Coated Steel (Japan Made).
XILINX FPGA Development Board Artix-7 XC7A100T Ethernet 4SFP AX7101 fpga Development Kits
By AXSOC
In Stock
$499.00
mpn: AX7101, ean: 6971390274361,
4.4 out of 5 stars with 38 reviews
The AX7101 board comprised FPGA core board and expansion board, four high-speed board-to-board connectors are used to connect between the core board and the expansion board. The core board is a minimal system which mainly consist of FPGA chipset, two DDR3 and QSPI FLASH. Features of FPGA Core BoardFPGA Device XILINX ARTIX-7 FPGA XC7A100T 101,440 Logic Cells; 240 DSP48 Slices include 18 x 18 multiplier, an adder, and accumulator; 4860Kb Block RAM Blocks; Memory 2pcs 4Gbit(256M x 16bit) DDR3
Viewing Page 1 of 11
View more products in Computer Components.
Feel free to Browse Our Catalog.